By October 30, 2012 Read More →

Controller is faster and easier to programme

121030_FanucFANUC says its new R-30iB robot controller will save up to 77% floor area, is easier and faster to program, saves power and maximises productivity. Overall volume of the compact new R-30iB design is reduced by 68%, measuring just 500mm x 600mm x 470mm.  The design provides further benefit in multi-robot systems where the controller is able to stack up; three stacked up controllers reduces the floor space required by 77%.

Using the same platform as the new FANUC 30i CNC controller, the completely revised robot controller packs the same power, and more, as its larger predecessor with more than 4,096 I/O supported, 40 axes control capability and 8 motion groups, up to 4 line tracking encoders and support for most common industrial communication/bus systems.

Making programming and interaction easier is the new FANUC iPendant Touch which comes with a 4D graphic function.  The new pendant provides real time visualisation of process on its touch screen monitor making programming and editing faster.  Typically, using 3D graphic simulations, the programmer can save time by easily seeing all active safety zones both when programming and importantly when recovering.

Energy saving is high on the feature list of the new R-30iB controller with improved energy efficiencies helping to contribute towards all important profit margins.  Automatic motor braking, after exceeding a programmed idle period, allows motors to reduce power but still maintain arm position.  Similarly cooling fans are stopped when not required and regeneration of power is enabled through an optional unit.

Improved software features on the new controller further provide opportunities for reducing cycle times and maximising productivity.  Learning Vibration Control (LVC) increases robot speed and acceleration for a given path providing typical increases of 8%-10% cycle time improvement.

Visit the FANUC website for more information.

See all stories for FANUC

Disclaimer: Robotics Update is not responsible for the content of submitted or externally produced articles and images. Click here to email us about any errors or omissions contained within this article