WHN Technologies was the winner of the ROBOTICS AWARD 2016 at the Hannover Messe. The news was announced by Olaf Lies, Minister of Economic Affairs, Labour and Transport for the German state of Lower Saxony, during the official prize-giving ceremony at Hannover Messe. This prestigious award has been presented since 2011 on behalf of Hannover […]
“The whole premise of our company is to bring manufacturing back to this country,” says Geoff Escallette, CEO of US based RSS Manufacturing and Phylrich, a highly specialised short run production facility which manufactures plumbing fixtures and fittings with turnaround time as quick as 24 hours. “Collaborative robots from Universal Robots fit perfectly with that […]
Collaborative robots – or cobots as most are affectionately known – are bringing the fences down in manufacturing and production facilities all over the world. Unlike early industrial robots that had to be isolated behind a protective cage, this new wave of robots comes equipped with sensors, vision and, in most cases, plenty of programmed […]
FANUC shared a stand with Abar Automation stand at this year’s Foodex Show, and visitors to the stand were handed a free can of soft drink by FANUC’s latest collaborative robot – the CR-7iA. Based on FANUC’s first mass produced collaborative robot – theCR-35iA – this new robot has a payload of 7kg and the […]
The Drives & Controls exhibition ran with a robot theme for 2016, which suited Mitsubishi Electric down to the ground as the company’s range of extremely dextrous robots was out in force at the show. Demonstrating various high-speed pick and place applications within confined spaces, MELFA robots from Mitsubishi Electric showed how repeat tasks could […]
In 2015 the number of industrial robots sold worldwide surpassed the 240,000 unit mark for the first time. This corresponds to global year-on-year growth of 8%. The greatest demand was again registered by the automotive industry. In a comparison of global markets, China continues to exhibit the highest demand for industrial robots, with sales rising […]
Omron has launched a new series of 49 industrial robots in 39 countries around the world. Developed by Omron Adept Technologies, the robots have been integrated with Omron’s family of sensors, safety components and NX/NJ series machine automation controllers to simplify the introduction of robots in a production environment. The launch covers three robot families […]
Manufacturers can often see the value of robot-assisted production but are concerned about the cost; not only of the robot itself but also its programming. A Universal Robot (UR) from RA Rodriguez is proving a good choice for anyone in this dilemma. It is affordable, adaptable and very easy to program so it can be […]
Comau’s Racer3 won the ‘Product of the Year’ award in the category ‘Industrial Robots’ during the thirteenth edition of the contest organised by Control Engineering Poland with the aim to reward the best technology and innovations. The award, presented during the 4.0 Industry Conference held in Warsaw, was preceded by two voting phases for a […]
Application phase for 10th vector award is now open
The application phase of the igus vector award 2026 has begun. Now in its tenth year, a joint initiative is honouring designers worldwide who use high-performance plastic energy chains to create cable guides that set new technological standards, with winners to receive up to 5,000 euros in prize money. The vector award has gained international […]
ChocoMatic comes to life with igus 7th axis
When customers tap a screen to choose their favourite chocolates, Roose Automation’s ‘ChocoMatic’ robot arm travels along a linear track, selects each chocolate, and delivers them without human intervention. Behind this playful, hygienic automation lies a clever piece of engineering: the 7th axis from igus. Roose Automation wanted to give its robot arm the freedom […]
Cost-effective robotic automation products
Mouser Electronics announces a distribution agreement with igus, a global leader in industrial and automation products. With over 60 years of design experience and a strong reputation for quality, igus offers a range of technically advanced “motion plastics” designed for Industry 4.0 and 5.0. The igus product portfolio includes flexible cables, robotic components, motor control […]
High-payload collaborative robots from OMRON
OMRON Robotics and Safety Technologies has expanded its TM S Series collaborative robot portfolio with three new models and a major software update, supporting manufacturers facing labour shortages and increasing requirements for flexible, high-mix production. The TM30S, TM20S and TM6S extend the series’ payload and reach capabilities for applications such as palletising, machine tending and […]
RARUK Automation demos cobot palletising solution
On 11-12 February 2026, Packaging Innovations and EMPACK will be returning to the NEC in Birmingham. RARUK Automation will be showcasing the PE10 Robotiq Palletising Solution designed specifically for Universal Robots collaborative robots (cobots). Palletising is a repetitive and strenuous task that poses risk of injury to workers. For manufacturers looking to increase efficiency, palletising […]
New off-the-shelf and modular palletisers
End-of-line palletising is a task commonly automated across a range of industries, due to bottlenecks and the risk of repetitive strain injury (RSI) to workers. RARUK Automation can now offer two simple approaches to palletising automation, from partner Robotiq. RARUK Automation is the exclusive UK representative for Robotiq, a Canadian manufacturer of end-of-arm tooling and […]
Customised robotics and automation systems: Astech Projects is an award-winning provider of advanced automated solutions. We work with clients worldwide to design and build robotics and automation systems that meet
... Read More »
Automation and robotics in food manufacturing
At Food Manufacturing Live, Jake Norman, managing director at OAL, discusses applications for robotics in food factories to automate the likes of pick and place operations, palletising, case packing and other areas. He highlights the picking of fresh fruit, with a particular demonstration on the stand showing a robot picking up oranges. “We work with […]
Bridging the gap in food and beverage plants
Food and beverage plants increasingly operate with a blend of equipment generations: legacy machinery that has served reliably for years, and newer automation technologies designed to enhance efficiency, traceability and sustainability. This hybrid setup gives manufacturers flexibility to modernise gradually, but it also presents a growing challenge: how to maintain ageing assets while integrating more […]
FANUC robot pairs hygiene with high performance
To meet the growing demand for food and cleanroom applications, FANUC has unveiled the latest model in its LR Mate industrial robot range. The compact and powerful LR Mate 10-11A Food/Clean has a 10kg payload and is compliant with ISO 4 Class cleanrooms. This makes it ideal for use in highly controlled environments across sectors […]
The benefits of automation to food manufacturers
Winning a large retail contract is a coup for any food manufacturer. However, supermarket price wars and changing food presentations to gain and maintain the interest of consumers, means that many manufacturers are being squeezed out of the market. Paul Wilkinson, business development manager at Pacepacker Services, looks at how automation can help. Today, most […]