Machine builders are beginning to implement artificial intelligence (AI) for a variety of tasks, such as predictive maintenance and control systems. If AI is used within control systems, there can be safety implications. For example, AI might determine how a robot reacts when a person enters its operating zone. Derek Coulson, compliance specialist at Hold […]
Schneider Electric has outlined how industrial automation can be transformed using EcoStruxure Machine Expert Twin and robotics to drive efficiency and long-term sustainability. Representing a scalable digital twin software suite for the entire machine lifecycle, EcoStruxure Machine Expert Twin enables parallel engineering of mechanical, electrical and controls workflows for truly agile development processes. Alexandru Al […]
2025 marks a significant milestone for BPX, as it celebrates its 60th anniversary. To celebrate, BPX has planned a series of activities and events throughout the year with the first event taking place at the end of April at Oulton Hall, close to Leeds. The Future of Automation event will bring together customers, leading manufacturers, […]
In the world of robot manufacturing, efficiency has always been king. Faster cycle times, greater precision and maximum output have long dictated how industrial robots are designed. But today, a new measure of success is emerging: sustainability. Here, Nigel Smith, managing director of TM Robotics, explores three key factors shaping sustainable robot design. 1. Energy-saving […]
Nottingham-based Caunton Engineering, one of the UK’s largest single-site steelwork contractors, has completed a major multi-million-pound upgrade of its manufacturing technology following the installation of two state-of-the-art robot-driven machines. The family-owned company, located on the site of the former Moorgreen Colliery in Newthorpe, is bringing this latest ‘intelligent’ technology to its on-site Cut Shack components […]
Robot dogs are being used for a variety of tasks, ranging from preserving heritage sites to assisting in manufacturing plants. igus has introduced its own quadruped robot, the SID1 bionic robot. Advancements in robotic dogs designed for surveillance and security purposes are showcasing the rapid development and deployment of technology. These quadruped robots are equipped […]
Elesa has extended its range of vacuum cups, responding to increasing demand across automation, packaging and robotics sectors. Designed for reliable, efficient material handling, the components offer tailored solutions for environments where precision and product integrity are critical. Vacuum cups are essential in many manufacturing and logistics processes. Operating through negative pressure, they create a […]
Motion Control Products (MCP) is excited to introduce the AK Series EtherCAT Bus Motion Controllers with I/O module expansion from Kinco, offering a new generation of medium-sized motion control systems. Designed to address diverse industrial control requirements, the AK series delivers advanced functionality and robust performance, making it an ideal solution for applications such as […]
OMRON has celebrated the grand opening of a new Automation Centre in Stuttgart, reaffirming its commitment to innovation, excellence and customer-centric solutions in industrial automation. Strategically located near key customers and partners, the new facility serves as a hub for expertise in advanced automation solutions. It enables true co-creation, proof-of-concept development, and hands-on collaboration. The […]
RBTX DOBOT partner launch hailed a success
igus UK marks a major milestone in accessible automation with the successful launch of its RBTX partnership with DOBOT Robotics. The event brought together engineers, system integrators, manufacturers and automation specialists to explore how flexible robotic solutions can be deployed quickly and cost-effectively, without the complexity traditionally associated with industrial automation. Live demonstrations showcased collaborative […]
What role does AI play in art?
The River of Light festival in Liverpool showcased ‘Face Value’, a captivating installation co-created by PhD student Emma Brass from the University of Liverpool and Venya Krutikov, co-founder of The Kazimier and Invisible Wind Factory. Blending artificial intelligence, robotics, and visual art, Face Value invites visitors to confront how technology perceives and redefines reality. The […]
Application phase for 10th vector award is now open
The application phase of the igus vector award 2026 has begun. Now in its tenth year, a joint initiative is honouring designers worldwide who use high-performance plastic energy chains to create cable guides that set new technological standards, with winners to receive up to 5,000 euros in prize money. The vector award has gained international […]
Powering the factories of the future
The combination of collaborative robotics and in-process digital metrology represents a strategic convergence for the manufacturing industry and factories of the future. On the one hand, collaborative robots make it possible to automate handling and assembly tasks flexibly and safely without the need for physical barriers and, on the other hand, digital metrology integrated into […]
Cobot installed at steering systems manufacturer
Steering systems manufacturer, Pailton Engineering, continues to modernise its manufacturing processes with a new collaborative robot (cobot) at its facility in Coventry. After a successful trial period, the company is installing a FAIRINO FR10 on the induction hardening ball pin cell, where it works alongside existing team members to support production. Designed to work alongside […]
RBTX DOBOT partner launch hailed a success
igus UK marks a major milestone in accessible automation with the successful launch of its RBTX partnership with DOBOT Robotics. The event brought together engineers, system integrators, manufacturers and automation specialists to explore how flexible robotic solutions can be deployed quickly and cost-effectively, without the complexity traditionally associated with industrial automation. Live demonstrations showcased collaborative […]
Customised robotics and automation systems: Astech Projects is an award-winning provider of advanced automated solutions. We work with clients worldwide to design and build robotics and automation systems that meet
... Read More »
Efficient palletising in the food industry
Intelligent automation with the Bosch Rexroth VarioFlow plus chain conveyor system and Hitmark Robotics solutions is delivering efficient palletising solutions for the food industry. In the food industry, solutions are in demand that increase efficiency, meet strict hygiene and safety requirements, and enable gentle product transport. Therefore, manufacturers are increasingly investing in modern automation that […]
ROBOTICS AWARD 2026 goes to GoodBytz
Presented annually at HANNOVER MESSE by Deutsche Messe, the ROBOTICS AWARD honours innovative robot assisted solutions in the fields of automation and logistics. This year’s award-winning solution features an advanced robotic kitchen that integrates lightweight, compact industrial robots manufactured by FANUC. The FANUC robots are specifically engineered to meet stringent food processing requirements, incorporating specialised […]
Automating the food sector: efficiency in action
The food and beverage industry has been slower to adopt automation than some other areas of manufacturing. Short-term supplier contracts and a reliance on cheap labour have proved obstacles to investment for some food producers, limiting their ability to grow their production capabilities. Fortunately, automation systems incorporating robotics from leading suppliers such as FANUC are […]
Shifting the narrative towards productivity
Productivity rates in the UK will need to rise if we are to remain a manufacturing force. The time to invest in automation is now, says Oliver Selby, head of sales for FANUC UK and Chair of BARA. The latest IFR figures show just how far British manufacturing has to climb in terms of automation […]