The decommissioning of nuclear facilities poses major challenges for operators. Whether decommissioning or safe containment, the amount of nuclear waste to be disposed of is growing at an overwhelming rate worldwide. Automation is increasingly required to handle nuclear waste, but the nuclear industry is reluctant of fully autonomous robotic control methods for safety reasons, and […]
For safe protection zone monitoring even in rugged conditions, the Pilz portfolio now includes another sensor for the safe radar system PSENradar: the new radar sensor PSEN rd1.2 can be used for Cat. 3 / PL d and so can safely protect robot applications too. In conjunction with the equally new analysing unit PSEN rd1.x […]
“You must be diversified enough to survive bad times,” said the American academic and investor, Joel Greenblatt, “so that skill and good process can have the chance to pay off in the long-term.” Here, Nigel Smith, CEO of TM Robotics, explains the importance of robot programming that’s simple enough to be refigured to any kind […]
UK robotics company Cyberselves has won a spot in the finals of the prestigious ANA Avatar XPRIZE global robotics competition. Cyberselves’ telepresence technology allows humans to teleport into a robot and control it in an intuitive, immersive way. The human operator can see, hear and feel through the robot, allowing them to perform tasks from […]
Bryson Recycling, the largest social enterprise recycler in the UK, has installed an AI-driven waste sorting robot to increase the efficiency and quality of its recycling service. Following previous innovations such as the introduction of its kerbside recycling products, the Kerb-Sort vehicle and the Wheelie Box, Bryson has worked with pioneering provider Recycleye to introduce […]
PRIMUS (Platform for Robotic Inspection and Maintenance for Unstructured Settings) developed by Fuzzy Logic and Visionic for Framatome Intercontrôle is a robotic NDT (Non-Destructive Testing) system for nuclear infrastructures. This software and hardware package is designed to be used by non-roboticist NDT operators, a major differentiating factor compared to existing solutions on the robotics and […]
For a human operator, screwdriving is a dull, repetitive and non-ergonomic task. But, for manufacturers it’s a crucial process that can have a significant bearing on the quality and durability of the end product. Automating the process is the obvious answer and a new collaborative robotic screwdriving solution from RARUK Automation allows this to be […]
Fanuc UK is sponsoring the Industrial Robotics Final of WorldSkills UK, as part of its wider commitment to supporting the development of the next generation of British and Irish robotics engineers. The competition sees over 400 students and apprentices vie for the title of National Skills Champion across as many as 64 disciplines, with the […]
Omron has signed an agreement for a capital investment in Techman Robot, the world’s second-largest collaborative robot brand that work with people at manufacturing sites. Omron will hold a stake of approximately 10% in Techman, with the investment expected to be completed by December 2021. In 2018, Omron entered into a strategic alliance with Techman […]
Cost-effective robotic automation products
Mouser Electronics announces a distribution agreement with igus, a global leader in industrial and automation products. With over 60 years of design experience and a strong reputation for quality, igus offers a range of technically advanced “motion plastics” designed for Industry 4.0 and 5.0. The igus product portfolio includes flexible cables, robotic components, motor control […]
igus makes predictive maintenance simple
Now more than ever, downtime is costly. To combat this, igus developed i.Cee, a smart plastics system that turns passive components into intelligent assets. By analysing data from sensors embedded in energy chains, bearings, and cables, i.Cee enables dynamic service life prediction, real-time alerts, and automated maintenance scheduling. Whether you are running high-speed packaging lines […]
igus introduces new humanoid robot
Humanoid robots are beginning to support industries in various ways, but what do they really bring to the table? Motion plastics specialist, igus is offering its first humanoid robot, ‘Iggy Rob’. According to estimates, 20 million humanoid robots could be in use in industry by 2030. The demand for this technology is increasing rapidly among […]
Cost-effective robotic automation products
Mouser Electronics announces a distribution agreement with igus, a global leader in industrial and automation products. With over 60 years of design experience and a strong reputation for quality, igus offers a range of technically advanced “motion plastics” designed for Industry 4.0 and 5.0. The igus product portfolio includes flexible cables, robotic components, motor control […]
See automation in action at MachineBuilding.Live
As a result of their popularity at the 2024 event, the number of Action Areas at MachineBuilding.Live 2025 has been increased. On these special stands, leading experts from across the machine building and factory automation spectrum will be providing live demonstrations of their latest technologies and innovations. Many of them will be making their UK […]
Vision system combined with robotics
On stand 163 in the Action Area at MachineBuilding.Live, Visicon will highlight the magic that happens when you combine the latest in machine vision systems with robotics. The combination of vision and robotics enables you to unlock the potential of automation with an affordable and accessible solution. Visicon is an integration partner in the UK […]
Customised robotics and automation systems: Astech Projects is an award-winning provider of advanced automated solutions. We work with clients worldwide to design and build robotics and automation systems that meet
... Read More »
OMRON robots automate poultry packing line
CP Foods UK is a major poultry producer supplying leading retailers, manufacturers and foodservice operators across the UK. With operations rooted in food safety, quality, and adaptability, the company constantly seeks ways to respond to shifting retailer and consumer demands. In its UK facilities, CP Foods UK prepares and packages chicken products for a dynamic […]
Automation and robotics for brewing and beverage
ABB and its machine and factory automation business, B&R Industrial Automation, will exhibit brewery and beverage technologies together at drinktec 2025, the world economic summit for the beverage and liquid food industry, giving visitors a chance to see how ABB technologies combine to optimise operations across the full production cycle. Spanning process control, adaptive manufacturing […]
Cobot sparkles in food factory cleaning solution
Samey Robotics and Rbot9 have chosen the FANUC CRX-10iA/L collaborative robot to power a game-changing cleaning system they have jointly developed for food factories. Named VOTTA, inspired by the Icelandic word for ‘certify’ and echoing the sound of ‘Þvotta’ (‘washing’), the system offers overhead, automated cleaning of large-scale areas without bulky structures or layout changes. […]
Shared programming environment for robotics and CNC
The last five decades have seen tremendous advances both in robotics and in CNC machining centre technology. In recent years manufacturers have begun reaping the benefits of bringing these two technologies together and robot tending of CNC machines is already helping to improve productivity for many businesses. However, there is more to come from these […]