A demonstration robot cell on the FANUC stand at the PPMA show highlighted how packaging companies can enjoy the best of both worlds of optimised productivity combined with the highest levels of operator safety. Completely open on two sides, the cell combined FANUC’s Dual Check Safety (DCS) technology with a safety scanner and safety camera. […]
In response to rising retailer demand for mixed product trays, FANUC has collaborated with integrator Pacepacker Services to engineer a first-of-its-kind robotic pot swap tray loading system. A demonstration cell was on show at PPMA, swapping pots between cardboard trays and featuring FANUC’s fenceless DCS safety technology. The robotic pick and place unit combines FANUC’s […]
On paper, the concept of automating vertical tray packing sounds relatively straightforward. However, even if the packs are presented uniformly to a robot with a vacuum end-effector, the shortcoming will always be ‘how do you get the last pack into the tray?’ The Shingle Tray Loader (STL) designed by Pacepacker Services solves this problem. The […]
This year saw the return of the ABB stand at The PPMA Show. ABB shared its stand with packaging systems specialist RM Group, a member of ABB’s Authorised Value Provider (AVP) network. A highlight of the stand was a demonstration cell featuring ABB’s FlexPicker robots, which are ideal for high speed picking and placing applications […]
The Robotics Update team were at the PPMA Show at the NEC, Birmingham in September, looking at innovations in robotics and vision technologies for packaging and palletising applications. Over the next ten pages, we’ll present some of the most interesting and exciting of those innovations, and highlight the latest news from the key players. The modern […]
Industrial robots can operate with pin-point, “mammalian” vision, with the innovative 3D Stinger Camera, which Scorpion Vision featured at the PPMA Show at the NEC Birmingham, 30 September to 1 October 2015. Scorpion Vision gave visitors the chance to see this innovative 3D Stinger Camera at work, with live demonstrations of the camera conducting real-time measurements of […]
Stemmer Imaging UK has scheduled its UK Vision Technology Forum for 3 March 2016. This is part of a series of Europe-wide Vision Technology Forums organised by Stemmer Imaging and the European Imaging Academy and will once again be held at the Silverstone Wing Exhibition and Conference Centre in Towcester, Northamptonshire, UK. Mark Williamson, corporate […]
FANUC UK showcased the capabilities of robots with intelligent vision at the PPMA Show, with a robotic golf cell that will give a masterclass in precision putting. The golf cell featured a FANUC LR Mate 200iD human arm sized mini robot, with both 2D and 3D iRVision technology. The LR Mate 200iD robot will pick and […]
On show at PPMA stand B34 this September, automation and controls specialist Omron will give original equipment manufacturers (OEMs) and integrators a real insight into new developments in integrated control, high-speed robotics, and how real-time data interchange between production-line operations and enterprise-wide IT systems can meet Industry 4.0 expectations. Pictured right: Omron’s delta robot range […]
The Robotics Update team were at the Hannover Messe this April, looking at the latest innovations and talking to the various robot suppliers, who were out in force. Over the next seven pages, we’ll present the most interesting and exciting of those innovations, and highlight the latest news from the key players. For a quick […]
igus makes predictive maintenance simple
Now more than ever, downtime is costly. To combat this, igus developed i.Cee, a smart plastics system that turns passive components into intelligent assets. By analysing data from sensors embedded in energy chains, bearings, and cables, i.Cee enables dynamic service life prediction, real-time alerts, and automated maintenance scheduling. Whether you are running high-speed packaging lines […]
igus introduces new humanoid robot
Humanoid robots are beginning to support industries in various ways, but what do they really bring to the table? Motion plastics specialist, igus is offering its first humanoid robot, ‘Iggy Rob’. According to estimates, 20 million humanoid robots could be in use in industry by 2030. The demand for this technology is increasing rapidly among […]
igus introduces new SID1 robotic dog
Robot dogs are being used for a variety of tasks, ranging from preserving heritage sites to assisting in manufacturing plants. igus has introduced its own quadruped robot, the SID1 bionic robot. Advancements in robotic dogs designed for surveillance and security purposes are showcasing the rapid development and deployment of technology. These quadruped robots are equipped […]
See automation in action at MachineBuilding.Live
As a result of their popularity at the 2024 event, the number of Action Areas at MachineBuilding.Live 2025 has been increased. On these special stands, leading experts from across the machine building and factory automation spectrum will be providing live demonstrations of their latest technologies and innovations. Many of them will be making their UK […]
Vision system combined with robotics
On stand 163 in the Action Area at MachineBuilding.Live, Visicon will highlight the magic that happens when you combine the latest in machine vision systems with robotics. The combination of vision and robotics enables you to unlock the potential of automation with an affordable and accessible solution. Visicon is an integration partner in the UK […]
RARUK Automation to offer collaborative 7th axis
Leading automation distributor, RARUK Automation, has announced a new partnership with Thomson, a Regal Rexnord Brand. The global leader in mechanical motion technology recently launched the Movotrak CTU (cobot transfer unit). RARUK Automation, known for supplying Universal Robots collaborative robots (cobots), can now offer Movotrak CTU as a complimentary product to its customers. The Movotrak […]
Customised robotics and automation systems: Astech Projects is an award-winning provider of advanced automated solutions. We work with clients worldwide to design and build robotics and automation systems that meet
... Read More »
OMRON robots automate poultry packing line
CP Foods UK is a major poultry producer supplying leading retailers, manufacturers and foodservice operators across the UK. With operations rooted in food safety, quality, and adaptability, the company constantly seeks ways to respond to shifting retailer and consumer demands. In its UK facilities, CP Foods UK prepares and packages chicken products for a dynamic […]
Automation and robotics for brewing and beverage
ABB and its machine and factory automation business, B&R Industrial Automation, will exhibit brewery and beverage technologies together at drinktec 2025, the world economic summit for the beverage and liquid food industry, giving visitors a chance to see how ABB technologies combine to optimise operations across the full production cycle. Spanning process control, adaptive manufacturing […]
Cobot sparkles in food factory cleaning solution
Samey Robotics and Rbot9 have chosen the FANUC CRX-10iA/L collaborative robot to power a game-changing cleaning system they have jointly developed for food factories. Named VOTTA, inspired by the Icelandic word for ‘certify’ and echoing the sound of ‘Þvotta’ (‘washing’), the system offers overhead, automated cleaning of large-scale areas without bulky structures or layout changes. […]