Scorpion Vision has announced that it will be bringing two innovative new PixeLINK 2.3 megapixel global shutter CMOS cameras to the UK market. The cameras are the latest addition to the PixeLINK USB 3.0 vision camera family and use Sony’s ground-breaking IMX174 and IMX249 CMOS sensors. The innovative sensors in the PixeLINK cameras are equipped […]
Tom Bouchier, formerly customer service manager, has been appointed as managing director for FANUC UK. With over 25 years’ experience within robotics and automation, Tom will lead UK activity working out of FANUC;s headquarters in Coventry. Tom’s role will be to push the company to further growth in each of the three divisions: FA, Robots, […]
A FANUC M410iC/185 universal palletising robot has been installed in the UK at pulse processor Askew and Barrett, where it has helped to boost productivity by 15-20% and eliminated a potential health and safety risk factor by automating a manual palletising operation. Askew and Barrett sources pulses from key agricultural merchants and then sorts, cleans […]
Industrial robots can operate with pin-point, “mammalian” vision, with the innovative 3D Stinger Camera, which Scorpion Vision featured at the PPMA Show at the NEC Birmingham, 30 September to 1 October 2015. Scorpion Vision gave visitors the chance to see this innovative 3D Stinger Camera at work, with live demonstrations of the camera conducting real-time measurements of […]
Stemmer Imaging UK has scheduled its UK Vision Technology Forum for 3 March 2016. This is part of a series of Europe-wide Vision Technology Forums organised by Stemmer Imaging and the European Imaging Academy and will once again be held at the Silverstone Wing Exhibition and Conference Centre in Towcester, Northamptonshire, UK. Mark Williamson, corporate […]
Aerotech has combined a delta robot with a scalable, open-architecture controller based on its proven A3200 machine controller, to provide the RCP-DELTA. The RCP-DELTA is available in four models that support payloads up to 3 kg, with X/Y operating ranges of 500/800/1100/1300 mm, and an optional continuous rotation about the Z axis (yaw). Extensive use […]
FANUC UK showcased the capabilities of robots with intelligent vision at the PPMA Show, with a robotic golf cell that will give a masterclass in precision putting. The golf cell featured a FANUC LR Mate 200iD human arm sized mini robot, with both 2D and 3D iRVision technology. The LR Mate 200iD robot will pick and […]
KUKA Systems UK has played a key role in developing an automated cell for a major research project into bulk additive manufacturing. The automation solutions specialist worked with research engineers from the Nuclear Advanced Manufacturing Research Centre (Nuclear AMRC) at Sheffield University to design a 10x5m robot cell for building near net shape parts from […]
Altec Engineering has become the latest official system partner of industrial robot supplier KUKA Robotics UK. Based in Bowburn, County Durham, Altec Engineering provides a comprehensive range of services which include design and build of special purpose equipment, jig and fixture design and manufacture, plus mechanical and electrical engineering support. Altec technical director Nick Batey […]
According to Igus, it is simple to set up the Triflex RSP (retraction system pneumatic) on a six-axis robot. Part of the Triflex series, the Triflex RSP system is suitable for multi-axial robotic applications. The Triflex RSP system offers consistent pullback forces on the Triflex R robot energy chain; Triflex RSP is adjustable and can […]
Application phase for 10th vector award is now open
The application phase of the igus vector award 2026 has begun. Now in its tenth year, a joint initiative is honouring designers worldwide who use high-performance plastic energy chains to create cable guides that set new technological standards, with winners to receive up to 5,000 euros in prize money. The vector award has gained international […]
ChocoMatic comes to life with igus 7th axis
When customers tap a screen to choose their favourite chocolates, Roose Automation’s ‘ChocoMatic’ robot arm travels along a linear track, selects each chocolate, and delivers them without human intervention. Behind this playful, hygienic automation lies a clever piece of engineering: the 7th axis from igus. Roose Automation wanted to give its robot arm the freedom […]
Cost-effective robotic automation products
Mouser Electronics announces a distribution agreement with igus, a global leader in industrial and automation products. With over 60 years of design experience and a strong reputation for quality, igus offers a range of technically advanced “motion plastics” designed for Industry 4.0 and 5.0. The igus product portfolio includes flexible cables, robotic components, motor control […]
High-payload collaborative robots from OMRON
OMRON Robotics and Safety Technologies has expanded its TM S Series collaborative robot portfolio with three new models and a major software update, supporting manufacturers facing labour shortages and increasing requirements for flexible, high-mix production. The TM30S, TM20S and TM6S extend the series’ payload and reach capabilities for applications such as palletising, machine tending and […]
RARUK Automation demos cobot palletising solution
On 11-12 February 2026, Packaging Innovations and EMPACK will be returning to the NEC in Birmingham. RARUK Automation will be showcasing the PE10 Robotiq Palletising Solution designed specifically for Universal Robots collaborative robots (cobots). Palletising is a repetitive and strenuous task that poses risk of injury to workers. For manufacturers looking to increase efficiency, palletising […]
New off-the-shelf and modular palletisers
End-of-line palletising is a task commonly automated across a range of industries, due to bottlenecks and the risk of repetitive strain injury (RSI) to workers. RARUK Automation can now offer two simple approaches to palletising automation, from partner Robotiq. RARUK Automation is the exclusive UK representative for Robotiq, a Canadian manufacturer of end-of-arm tooling and […]
Customised robotics and automation systems: Astech Projects is an award-winning provider of advanced automated solutions. We work with clients worldwide to design and build robotics and automation systems that meet
... Read More »
Automation and robotics in food manufacturing
At Food Manufacturing Live, Jake Norman, managing director at OAL, discusses applications for robotics in food factories to automate the likes of pick and place operations, palletising, case packing and other areas. He highlights the picking of fresh fruit, with a particular demonstration on the stand showing a robot picking up oranges. “We work with […]
Bridging the gap in food and beverage plants
Food and beverage plants increasingly operate with a blend of equipment generations: legacy machinery that has served reliably for years, and newer automation technologies designed to enhance efficiency, traceability and sustainability. This hybrid setup gives manufacturers flexibility to modernise gradually, but it also presents a growing challenge: how to maintain ageing assets while integrating more […]
FANUC robot pairs hygiene with high performance
To meet the growing demand for food and cleanroom applications, FANUC has unveiled the latest model in its LR Mate industrial robot range. The compact and powerful LR Mate 10-11A Food/Clean has a 10kg payload and is compliant with ISO 4 Class cleanrooms. This makes it ideal for use in highly controlled environments across sectors […]